پودمان:Citation/CS1: تفاوت میان نسخهها
پرش به ناوبری
پرش به جستجو
بدون خلاصۀ ویرایش |
جز (۱ نسخه واردشده) |
(بدون تفاوت)
|
نسخهٔ کنونی تا ۶ دسامبر ۲۰۱۷، ساعت ۱۸:۵۳
توضیحات این پودمان میتواند در پودمان:Citation/CS1/توضیحات قرار گیرد.
-- در زمان به روزرسانی توجه کنید که کد بومی شدهاست لطفا تغییرات انجام شده را در بهروزرسانی اعمال نمایید. local z = { error_categories = {}; -- for categorizing citations that contain errors error_ids = {}; message_tail = {}; maintenance_cats = {}; -- for categorizing citations that aren't erroneous per se, but could use a little work properties_cats = {}; -- for categorizing citations based on certain properties, language of source for instance } -- Whether variable is set or not function is_set( var ) return not (var == nil or var == ''); end -- First set variable or nil if none function first_set(...) local list = {...}; for _, var in pairs(list) do if is_set( var ) then return var; end end end -- Whether needle is in haystack function inArray( needle, haystack ) if needle == nil then return false; end for n,v in ipairs( haystack ) do if v == needle then return n; end end return false; end --[[ Categorize and emit an error message when the citation contains one or more deprecated parameters. Because deprecated parameters (currently |month=, |coauthor=, and |coauthors=) aren't related to each other and because these parameters may be concatenated into the variables used by |date= and |author#= (and aliases) details of which parameter caused the error message are not provided. Only one error message is emitted regardless of the number of deprecated parameters in the citation. ]] function deprecated_parameter(name) if true ~= Page_in_deprecated_cat then -- if we haven't been here before then set a Page_in_deprecated_cat=true; -- sticky flag so that if there are more than one deprecated parameter the category is added only once table.insert( z.message_tail, { seterror( 'deprecated_params', {name}, true ) } ); -- add error message end end -- Populates numbered arguments in a message string using an argument table. function substitute( msg, args ) return args and mw.message.newRawMessage( msg, args ):plain() or msg; end --[[--------------------------< K E R N _ Q U O T E S >-------------------------------------------------------- Apply kerning to open the space between the quote mark provided by the Module and a leading or trailing quote mark contained in a |title= or |chapter= parameter's value. This function will positive kern either single or double quotes: "'Unkerned title with leading and trailing single quote marks'" " 'Kerned title with leading and trailing single quote marks' " (in real life the kerning isn't as wide as this example) Double single quotes (italic or bold wikimarkup) are not kerned. Call this function for chapter titles, for website titles, etc; not for book titles. ]] function kern_quotes (str) local cap=''; local cap2=''; cap, cap2 = str:match ("^([\"\'])([^\'].+)"); -- match leading double or single quote but not double single quotes if is_set (cap) then str = substitute (cfg.presentation['kern-left'], {cap, cap2}); end cap, cap2 = str:match ("^(.+[^\'])([\"\'])$") if is_set (cap) then str = substitute (cfg.presentation['kern-right'], {cap, cap2}); end return str; end --[[--------------------------< F O R M A T _ S C R I P T _ V A L U E >---------------------------------------- |script-title= holds title parameters that are not written in Latin based scripts: Chinese, Japanese, Arabic, Hebrew, etc. These scripts should not be italicized and may be written right-to-left. The value supplied by |script-title= is concatenated onto Title after Title has been wrapped in italic markup. Regardless of language, all values provided by |script-title= are wrapped in <bdi>...</bdi> tags to isolate rtl languages from the English left to right. |script-title= provides a unique feature. The value in |script-title= may be prefixed with a two-character ISO639-1 language code and a colon: |script-title=ja:*** *** (where * represents a Japanese character) Spaces between the two-character code and the colon and the colon and the first script character are allowed: |script-title=ja : *** *** |script-title=ja: *** *** |script-title=ja :*** *** Spaces preceding the prefix are allowed: |script-title = ja:*** *** The prefix is checked for validity. If it is a valid ISO639-1 language code, the lang attribute (lang="ja") is added to the <bdi> tag so that browsers can know the language the tag contains. This may help the browser render the script more correctly. If the prefix is invalid, the lang attribute is not added. At this time there is no error message for this condition. At this writing, only |script-title= is supported. It is anticipated that additional parameters will be created to use this function. TODO: error messages when prefix is invalid ISO639-1 code; when script_value has prefix but no script; ]] function format_script_value (script_value) local lang=''; -- initialize to empty string local name; if script_value:match('^%l%l%s*:') then -- if first 3 non-space characters are script language prefix lang = script_value:match('^(%l%l)%s*:%s*%S.*'); -- get the language prefix or nil if there is no script if not is_set (lang) then return ''; -- script_value was just the prefix so return empty string end -- if we get this far we have prefix and script name = mw.language.fetchLanguageName( lang, "en" ); -- get language name so that we can use it to categorize if is_set (name) then -- is prefix a proper ISO 639-1 language code? script_value = script_value:gsub ('^%l%l%s*:%s*', ''); -- strip prefix from script -- is prefix one of these language codes? if inArray (lang, {'ar', 'bs', 'dv', 'el', 'fa', 'hy', 'ja', 'ko', 'ku', 'he', 'ps', 'ru', 'sd', 'sr', 'th', 'uk', 'ug', 'yi', 'zh'}) then table.insert( z.properties_cats, 'CS1 uses ' .. name .. '-language script ('..lang..')'); -- categorize in language-specific categories else table.insert( z.properties_cats, 'CS1 uses foreign language script'); -- use this category as a catchall until language-specific category is available end lang = ' lang="' .. lang .. '" '; -- convert prefix into a lang attribute else lang = ''; -- invalid so set lang to empty string end end script_value = substitute (cfg.presentation['bdi'], {lang, script_value}); -- isolate in case script is rtl return script_value; end --[[--------------------------< S C R I P T _ C O N C A T E N A T E >------------------------------------------ Initially for |title= and |script-title=, this function concatenates those two parameter values after the script value has been wrapped in <bdi> tags. ]] function script_concatenate (title, script) if is_set (script) then script = format_script_value (script); -- <bdi> tags, lang atribute, categorization, etc; returns empty string on error if is_set (script) then title = title .. ' ' .. script; -- concatenate title and script title end end return title; end --[[--------------------------< W R A P _ S T Y L E >---------------------------------------------------------- Applies styling to various parameters. Supplied string is wrapped using a message_list configuration taking one argument; protects italic styled parameters. Additional text taken from citation_config.presentation - the reason this function is similar to but separate from wrap_msg(). ]] function wrap_style (key, str) if not is_set( str ) then return ""; elseif inArray( key, { 'italic-title', 'trans-italic-title' } ) then str = safeforitalics( str ); end return substitute( cfg.presentation[key], {str} ); end --[[--------------------------< W R A P _ M S G >-------------------------------------------------------------- Applies additional message text to various parameter values. Supplied string is wrapped using a message_list configuration taking one argument. Supports lower case text for {{citation}} templates. Additional text taken from citation_config.messages - the reason this function is similar to but separate from wrap_style(). ]] function wrap_msg (key, str, lower) if not is_set( str ) then return ""; end if true == lower then local msg; msg = cfg.messages[key]:lower(); -- set the message to lower case before str = substitute( msg, {str} ); -- including template text return str; else return substitute( cfg.messages[key], {str} ); end end --[[--------------------------< F O R M A T _ C H A P T E R _ T I T L E >-------------------------------------- Format the three chapter parameters: |chapter=, |trans-chapter=, and |chapter-url= into a single Chapter meta- parameter (chapter_url_source used for error messages). ]] function format_chapter_title (chapter, transchapter, chapterurl, chapter_url_source) local chapter_error = ''; if not is_set (chapter) then chapter = ''; -- just to be safe for concatenation if is_set (transchapter) then chapter = wrap_style ('trans-quoted-title', transchapter); chapter_error = " " .. seterror ('trans_missing_chapter'); end if is_set (chapterurl) then chapter = externallink (chapterurl, chapter, chapter_url_source); -- adds bare_url_missing_title error if appropriate end return chapter .. chapter_error; else -- here when chapter is set chapter = kern_quotes (chapter); -- if necessary, separate chapter title's leading and trailing quote marks from Module provided quote marks chapter = wrap_style ('quoted-title', chapter); if is_set (transchapter) then transchapter = wrap_style ('trans-quoted-title', transchapter); chapter = chapter .. ' ' .. transchapter; end if is_set (chapterurl) then chapter = externallink (chapterurl, chapter); -- adds bare_url_missing_title error if appropriate end end return chapter; end --[[ Argument wrapper. This function provides support for argument mapping defined in the configuration file so that multiple names can be transparently aliased to single internal variable. ]] function argument_wrapper( args ) local origin = {}; return setmetatable({ ORIGIN = function( self, k ) local dummy = self[k]; --force the variable to be loaded. return origin[k]; end }, { __index = function ( tbl, k ) if origin[k] ~= nil then return nil; end local args, list, v = args, cfg.aliases[k]; if type( list ) == 'table' then v, origin[k] = selectone( args, list, 'redundant_parameters' ); if origin[k] == nil then origin[k] = ''; -- Empty string, not nil end elseif list ~= nil then v, origin[k] = args[list], list; else -- maybe let through instead of raising an error? -- v, origin[k] = args[k], k; error( cfg.messages['unknown_argument_map'] ); end -- Empty strings, not nil; if v == nil then v = cfg.defaults[k] or ''; origin[k] = ''; end tbl = rawset( tbl, k, v ); return v; end, }); end --[[ Looks for a parameter's name in the whitelist. Parameters in the whitelist can have three values: true - active, supported parameters false - deprecated, supported parameters nil - unsupported parameters ]] function validate( name ) local name = tostring( name ); local state = whitelist.basic_arguments[ name ]; -- Normal arguments if true == state then return true; end -- valid actively supported parameter if false == state then deprecated_parameter (name); -- parameter is deprecated but still supported return true; end -- Arguments with numbers in them name = name:gsub( "%d+", "#" ); -- replace digit(s) with # (last25 becomes last# state = whitelist.numbered_arguments[ name ]; if true == state then return true; end -- valid actively supported parameter if false == state then deprecated_parameter (name); -- parameter is deprecated but still supported return true; end return false; -- Not supported because not found or name is set to nil end --[[--------------------------< E R R O R C O M M E N T >------------------------------------------------------ Wraps error messages with css markup according to the state of hidden. ]] function errorcomment( content, hidden ) return substitute( hidden and cfg.presentation['hidden-error'] or cfg.presentation['visible-error'], content ); end --[[ Sets an error condition and returns the appropriate error message. The actual placement of the error message in the output is the responsibility of the calling function. ]] function seterror( error_id, arguments, raw, prefix, suffix ) local error_state = cfg.error_conditions[ error_id ]; prefix = prefix or ""; suffix = suffix or ""; if error_state == nil then error( cfg.messages['undefined_error'] ); elseif is_set( error_state.category ) then table.insert( z.error_categories, error_state.category ); end local message = substitute( error_state.message, arguments ); message = message .. " ([[" .. cfg.messages['help page link'] .. "#" .. error_state.anchor .. "|" .. cfg.messages['help page label'] .. "]])"; z.error_ids[ error_id ] = true; if inArray( error_id, { 'bare_url_missing_title', 'trans_missing_title' } ) and z.error_ids['citation_missing_title'] then return '', false; end message = table.concat({ prefix, message, suffix }); if raw == true then return message, error_state.hidden; end return errorcomment( message, error_state.hidden ); end -- Formats a wiki style external link function externallinkid(options) local url_string = options.id; if options.encode == true or options.encode == nil then url_string = mw.uri.encode( url_string ); end return mw.ustring.format( '[[%s|%s]]%s[%s%s%s %s]', options.link, options.label, options.separator or " ", options.prefix, url_string, options.suffix or "", mw.text.nowiki(options.id) ); end -- Formats a wiki style internal link function internallinkid(options) return mw.ustring.format( '[[%s|%s]]%s[[%s%s%s|%s]]', options.link, options.label, options.separator or " ", options.prefix, options.id, options.suffix or "", mw.text.nowiki(options.id) ); end -- Format an external link with error checking function externallink( URL, label, source ) local error_str = ""; if not is_set( label ) then label = URL; if is_set( source ) then error_str = seterror( 'bare_url_missing_title', { wrap_style ('parameter', source) }, false, " " ); else error( cfg.messages["bare_url_no_origin"] ); end end if not checkurl( URL ) then error_str = seterror( 'bad_url', {}, false, " " ) .. error_str; end return table.concat({ "[", URL, " ", safeforurl( label ), "]", error_str }); end --[[--------------------------< N O W R A P _ D A T E >-------------------------------------------------------- When date is YYYY-MM-DD format wrap in nowrap span: <span ...>YYYY-MM-DD</span>. When date is DD MMMM YYYY or is MMMM DD, YYYY then wrap in nowrap span: <span ...>DD MMMM</span> YYYY or <span ...>MMMM DD,</span> YYYY DOES NOT yet support MMMM YYYY or any of the date ranges. ]] function nowrap_date (date) local cap=''; local cap2=''; if date:match("^%d%d%d%d%-%d%d%-%d%d$") then date = substitute (cfg.presentation['nowrap1'], date); elseif date:match("%a+%s*%d%d?,%s*%d%d%d%d") or date:match ("%d%d?%s*%a+%s*%d%d%d%d") then cap, cap2 = string.match (date, "^(.*)%s+(%d%d%d%d)$"); date = substitute (cfg.presentation['nowrap2'], {cap, cap2}); end return date; end --[[--------------------------< A M A Z O N >------------------------------------------------------------------ Formats a link to Amazon. Do simple error checking: asin must be mix of 10 numeric or uppercase alpha characters. If a mix, first character must be uppercase alpha; if all numeric, asins must be 10-digit isbn. If 10-digit isbn, add a maintenance category so a bot or awb script can replace |asin= with |isbn=. Error message if not 10 characters, if not isbn10, if mixed and first character is a digit. ]] function amazon(id, domain) local err_cat = "" if not id:match("^[%d%u][%d%u][%d%u][%d%u][%d%u][%d%u][%d%u][%d%u][%d%u][%d%u]$") then err_cat = ' ' .. seterror ('bad_asin'); -- asin is not a mix of 10 uppercase alpha and numeric characters else if id:match("^%d%d%d%d%d%d%d%d%d[%dX]$") then -- if 10-digit numeric (or 9 digits with terminal X) if checkisbn( id ) then -- see if asin value is isbn10 table.insert( z.maintenance_cats, "CS1 maint: ASIN uses ISBN"); -- add to maint category elseif not is_set (err_cat) then err_cat = ' ' .. seterror ('bad_asin'); -- asin is not isbn10 end elseif not id:match("^%u[%d%u]+$") then err_cat = ' ' .. seterror ('bad_asin'); -- asin doesn't begin with uppercase alpha end end if not is_set(domain) then domain = "com"; elseif inArray (domain, {'jp', 'uk'}) then -- Japan, United Kingdom domain = "co." .. domain; elseif inArray (domain, {'au', 'br', 'mx'}) then -- Australia, Brazil, Mexico domain = "com." .. domain; end local handler = cfg.id_handlers['ASIN']; return externallinkid({link = handler.link, label=handler.label , prefix="//www.amazon."..domain.."/dp/",id=id, encode=handler.encode, separator = handler.separator}) .. err_cat; end --[[--------------------------< A R X I V >-------------------------------------------------------------------- See: http://arxiv.org/help/arxiv_identifier format and error check arXiv identifier. There are three valid forms of the identifier: the first form, valid only between date codes 9108 and 0703 is: arXiv:<archive>.<class>/<date code><number><version> where: <archive> is a string of alpha characters - may be hyphenated; no other punctuation <class> is a string of alpha characters - may be hyphenated; no other punctuation <date code> is four digits in the form YYMM where YY is the last two digits of the four-digit year and MM is the month number January = 01 first digit of YY for this form can only 9 and 0 <number> is a three-digit number <version> is a 1 or more digit number preceded with a lowercase v; no spaces (undocumented) the second form, valid from April 2007 through December 2014 is: arXiv:<date code>.<number><version> where: <date code> is four digits in the form YYMM where YY is the last two digits of the four-digit year and MM is the month number January = 01 <number> is a four-digit number <version> is a 1 or more digit number preceded with a lowercase v; no spaces the third form, valid from January 2015 is: arXiv:<date code>.<number><version> where: <date code> and <version> are as defined for 0704-1412 <number> is a five-digit number ]] function arxiv (id) local handler = cfg.id_handlers['ARXIV']; local year, month, version; local err_cat = "" if id:match("^%a[%a%.%-]+/[90]%d[01]%d%d%d%d$") or id:match("^%a[%a%.%-]+/[90]%d[01]%d%d%d%dv%d+$") then -- test for the 9108-0703 format w/ & w/o version year, month = id:match("^%a[%a%.%-]+/([90]%d)([01]%d)%d%d%d[v%d]*$"); year = tonumber(year); month = tonumber(month); if ((not (90 < year or 8 > year)) or (1 > month or 12 < month)) or -- if invalid year or invalid month ((91 == year and 7 > month) or (7 == year and 3 < month)) then -- if years ok, are starting and ending months ok? err_cat = ' ' .. seterror( 'bad_arxiv' ); -- set error message end elseif id:match("^%d%d[01]%d%.%d%d%d%d$") or id:match("^%d%d[01]%d%.%d%d%d%dv%d+$") then -- test for the 0704-1412 w/ & w/o version year, month = id:match("^(%d%d)([01]%d)%.%d%d%d%d[v%d]*$"); year = tonumber(year); month = tonumber(month); if ((7 > year) or (14 < year) or (1 > month or 12 < month)) or -- is year invalid or is month invalid? (doesn't test for future years) ((7 == year) and (4 > month)) then --or -- when year is 07, is month invalid (before April)? err_cat = ' ' .. seterror( 'bad_arxiv' ); -- set error message end elseif id:match("^%d%d[01]%d%.%d%d%d%d%d$") or id:match("^%d%d[01]%d%.%d%d%d%d%dv%d+$") then -- test for the 1501- format w/ & w/o version year, month = id:match("^(%d%d)([01]%d)%.%d%d%d%d%d[v%d]*$"); year = tonumber(year); month = tonumber(month); if ((15 > year) or (1 > month or 12 < month)) then -- is year invalid or is month invalid? (doesn't test for future years) err_cat = ' ' .. seterror( 'bad_arxiv' ); -- set error message end else err_cat = ' ' .. seterror( 'bad_arxiv' ); -- arXiv id doesn't match any format end return externallinkid({link = handler.link, label = handler.label, prefix=handler.prefix,id=id,separator=handler.separator, encode=handler.encode}) .. err_cat; end --[[ lccn normalization (http://www.loc.gov/marc/lccn-namespace.html#normalization) 1. Remove all blanks. 2. If there is a forward slash (/) in the string, remove it, and remove all characters to the right of the forward slash. 3. If there is a hyphen in the string: a. Remove it. b. Inspect the substring following (to the right of) the (removed) hyphen. Then (and assuming that steps 1 and 2 have been carried out): 1. All these characters should be digits, and there should be six or less. (not done in this function) 2. If the length of the substring is less than 6, left-fill the substring with zeroes until the length is six. Returns a normalized lccn for lccn() to validate. There is no error checking (step 3.b.1) performed in this function. ]] function normalize_lccn (lccn) lccn = lccn:gsub ("%s", ""); -- 1. strip whitespace if nil ~= string.find (lccn,'/') then lccn = lccn:match ("(.-)/"); -- 2. remove forward slash and all character to the right of it end local prefix local suffix prefix, suffix = lccn:match ("(.+)%-(.+)"); -- 3.a remove hyphen by splitting the string into prefix and suffix if nil ~= suffix then -- if there was a hyphen suffix=string.rep("0", 6-string.len (suffix)) .. suffix; -- 3.b.2 left fill the suffix with 0s if suffix length less than 6 lccn=prefix..suffix; -- reassemble the lccn end return lccn; end --[[ Format LCCN link and do simple error checking. LCCN is a character string 8-12 characters long. The length of the LCCN dictates the character type of the first 1-3 characters; the rightmost eight are always digits. http://info-uri.info/registry/OAIHandler?verb=GetRecord&metadataPrefix=reg&identifier=info:lccn/ length = 8 then all digits length = 9 then lccn[1] is lower case alpha length = 10 then lccn[1] and lccn[2] are both lower case alpha or both digits length = 11 then lccn[1] is lower case alpha, lccn[2] and lccn[3] are both lower case alpha or both digits length = 12 then lccn[1] and lccn[2] are both lower case alpha ]] function lccn(lccn) local handler = cfg.id_handlers['LCCN']; local err_cat = ''; -- presume that LCCN is valid local id = lccn; -- local copy of the lccn id = normalize_lccn (id); -- get canonical form (no whitespace, hyphens, forward slashes) local len = id:len(); -- get the length of the lccn if 8 == len then if id:match("[^%d]") then -- if LCCN has anything but digits (nil if only digits) err_cat = ' ' .. seterror( 'bad_lccn' ); -- set an error message end elseif 9 == len then -- LCCN should be adddddddd if nil == id:match("%l%d%d%d%d%d%d%d%d") then -- does it match our pattern? err_cat = ' ' .. seterror( 'bad_lccn' ); -- set an error message end elseif 10 == len then -- LCCN should be aadddddddd or dddddddddd if id:match("[^%d]") then -- if LCCN has anything but digits (nil if only digits) ... if nil == id:match("^%l%l%d%d%d%d%d%d%d%d") then -- ... see if it matches our pattern err_cat = ' ' .. seterror( 'bad_lccn' ); -- no match, set an error message end end elseif 11 == len then -- LCCN should be aaadddddddd or adddddddddd if not (id:match("^%l%l%l%d%d%d%d%d%d%d%d") or id:match("^%l%d%d%d%d%d%d%d%d%d%d")) then -- see if it matches one of our patterns err_cat = ' ' .. seterror( 'bad_lccn' ); -- no match, set an error message end elseif 12 == len then -- LCCN should be aadddddddddd if not id:match("^%l%l%d%d%d%d%d%d%d%d%d%d") then -- see if it matches our pattern err_cat = ' ' .. seterror( 'bad_lccn' ); -- no match, set an error message end else err_cat = ' ' .. seterror( 'bad_lccn' ); -- wrong length, set an error message end if not is_set (err_cat) and nil ~= lccn:find ('%s') then err_cat = ' ' .. seterror( 'bad_lccn' ); -- lccn contains a space, set an error message end return externallinkid({link = handler.link, label = handler.label, prefix=handler.prefix,id=lccn,separator=handler.separator, encode=handler.encode}) .. err_cat; end --[[ Format PMID and do simple error checking. PMIDs are sequential numbers beginning at 1 and counting up. This code checks the PMID to see that it contains only digits and is less than test_limit; the value in local variable test_limit will need to be updated periodically as more PMIDs are issued. ]] function pmid(id) local test_limit = 30000000; -- update this value as PMIDs approach local handler = cfg.id_handlers['PMID']; local err_cat = ''; -- presume that PMID is valid if id:match("[^%d]") then -- if PMID has anything but digits err_cat = ' ' .. seterror( 'bad_pmid' ); -- set an error message else -- PMID is only digits local id_num = tonumber(id); -- convert id to a number for range testing if 1 > id_num or test_limit < id_num then -- if PMID is outside test limit boundaries err_cat = ' ' .. seterror( 'bad_pmid' ); -- set an error message end end return externallinkid({link = handler.link, label = handler.label, prefix=handler.prefix,id=id,separator=handler.separator, encode=handler.encode}) .. err_cat; end --[[ Determines if a PMC identifier's online version is embargoed. Compares the date in |embargo= against today's date. If embargo date is in the future, returns true; otherwise, returns false because the embargo has expired or |embargo= not set in this cite. ]] function is_embargoed(embargo) if is_set(embargo) then local lang = mw.getContentLanguage(); local good1, embargo_date, good2, todays_date; good1, embargo_date = pcall( lang.formatDate, lang, 'U', embargo ); good2, todays_date = pcall( lang.formatDate, lang, 'U' ); if good1 and good2 and tonumber( embargo_date ) >= tonumber( todays_date ) then --is embargo date is in the future? return true; -- still embargoed end end return false; -- embargo expired or |embargo= not set end --[[ Format a PMC, do simple error checking, and check for embargoed articles. The embargo parameter takes a date for a value. If the embargo date is in the future the PMC identifier will not be linked to the article. If the embargo specifies a date in the past, or if it is empty or omitted, then the PMC identifier is linked to the article through the link at cfg.id_handlers['PMC'].prefix. PMCs are sequential numbers beginning at 1 and counting up. This code checks the PMC to see that it contains only digits and is less than test_limit; the value in local variable test_limit will need to be updated periodically as more PMCs are issued. ]] function pmc(id, embargo) local test_limit = 5000000; -- update this value as PMCs approach local handler = cfg.id_handlers['PMC']; local err_cat = ''; -- presume that PMC is valid local text; if id:match("[^%d]") then -- if PMC has anything but digits err_cat = ' ' .. seterror( 'bad_pmc' ); -- set an error message else -- PMC is only digits local id_num = tonumber(id); -- convert id to a number for range testing if 1 > id_num or test_limit < id_num then -- if PMC is outside test limit boundaries err_cat = ' ' .. seterror( 'bad_pmc' ); -- set an error message end end if is_embargoed(embargo) then text="[[" .. handler.link .. "|" .. handler.label .. "]]:" .. handler.separator .. id .. err_cat; --still embargoed so no external link else text = externallinkid({link = handler.link, label = handler.label, --no embargo date, ok to link to article prefix=handler.prefix,id=id,separator=handler.separator, encode=handler.encode}) .. err_cat; end return text; end -- Formats a DOI and checks for DOI errors. -- DOI names contain two parts: prefix and suffix separated by a forward slash. -- Prefix: directory indicator '10.' followed by a registrant code -- Suffix: character string of any length chosen by the registrant -- This function checks a DOI name for: prefix/suffix. If the doi name contains spaces or endashes, -- or, if it ends with a period or a comma, this function will emit a bad_doi error message. -- DOI names are case-insensitive and can incorporate any printable Unicode characters so the test for spaces, endash, -- and terminal punctuation may not be technically correct but it appears, that in practice these characters are rarely if ever used in doi names. function doi(id, inactive) local cat = "" local handler = cfg.id_handlers['DOI']; local text; if is_set(inactive) then local inactive_year = inactive:match("%d%d%d%d") or ''; -- try to get the year portion from the inactive date text = "[[" .. handler.link .. "|" .. handler.label .. "]]:" .. id; if is_set(inactive_year) then table.insert( z.error_categories, "صفحهها با شناسانه برنمود رقمی غیرفعال از " .. inactive_year ); else table.insert( z.error_categories, "صفحهها با شناسانه برنمود رقمی غیرفعال" ); -- when inactive doesn't contain a recognizable year end inactive = " (" .. cfg.messages['inactive'] .. " " .. inactive .. ")" else text = externallinkid({link = handler.link, label = handler.label, prefix=handler.prefix,id=id,separator=handler.separator, encode=handler.encode}) inactive = "" end if nil == id:match("^10%.[^%s–]-/[^%s–]-[^%.,]$") then -- doi must begin with '10.', must contain a fwd slash, must not contain spaces or endashes, and must not end with period or comma cat = ' ' .. seterror( 'bad_doi' ); end return text .. inactive .. cat end -- Formats an OpenLibrary link, and checks for associated errors. function openlibrary(id) local code = id:match("^%d+([AMW])$"); -- only digits followed by 'A', 'M', or 'W' local handler = cfg.id_handlers['OL']; if ( code == "A" ) then return externallinkid({link=handler.link, label=handler.label, prefix="http://openlibrary.org/authors/OL",id=id, separator=handler.separator, encode = handler.encode}) elseif ( code == "M" ) then return externallinkid({link=handler.link, label=handler.label, prefix="http://openlibrary.org/books/OL",id=id, separator=handler.separator, encode = handler.encode}) elseif ( code == "W" ) then return externallinkid({link=handler.link, label=handler.label, prefix= "http://openlibrary.org/works/OL",id=id, separator=handler.separator, encode = handler.encode}) else return externallinkid({link=handler.link, label=handler.label, prefix= "http://openlibrary.org/OL",id=id, separator=handler.separator, encode = handler.encode}) .. ' ' .. seterror( 'bad_ol' ); end end --[[ Validate and format an issn. This code fixes the case where an editor has included an ISSN in the citation but has separated the two groups of four digits with a space. When that condition occurred, the resulting link looked like this: |issn=0819 4327 gives: [http://www.worldcat.org/issn/0819 4327 0819 4327] -- can't have spaces in an external link This code now prevents that by inserting a hyphen at the issn midpoint. It also validates the issn for length and makes sure that the checkdigit agrees with the calculated value. Incorrect length (8 digits), characters other than 0-9 and X, or checkdigit / calculated value mismatch will all cause a check issn error message. The issn is always displayed with a hyphen, even if the issn was given as a single group of 8 digits. ]] function issn(id) local issn_copy = id; -- save a copy of unadulterated issn; use this version for display if issn does not validate local handler = cfg.id_handlers['ISSN']; local text; local valid_issn = true; id=id:gsub( "[%s-–]", "" ); -- strip spaces, hyphens, and endashes from the issn if 8 ~= id:len() or nil == id:match( "^%d*X?$" ) then -- validate the issn: 8 digits long, containing only 0-9 or X in the last position valid_issn=false; -- wrong length or improper character else valid_issn=is_valid_isxn(id, 8); -- validate issn end if true == valid_issn then id = string.sub( id, 1, 4 ) .. "-" .. string.sub( id, 5 ); -- if valid, display correctly formatted version else id = issn_copy; -- if not valid, use the show the invalid issn with error message end text = externallinkid({link = handler.link, label = handler.label, prefix=handler.prefix,id=id,separator=handler.separator, encode=handler.encode}) if false == valid_issn then text = text .. ' ' .. seterror( 'bad_issn' ) -- add an error message if the issn is invalid end return text end --[[--------------------------< M E S S A G E _ I D >---------------------------------------------------------- Validate and format a usenet message id. Simple error checking, looks for 'id-left@id-right' not enclosed in '<' and/or '>' angle brackets. ]] function message_id (id) local handler = cfg.id_handlers['USENETID']; text = externallinkid({link = handler.link, label = handler.label, prefix=handler.prefix,id=id,separator=handler.separator, encode=handler.encode}) if not id:match('^.+@.+$') or not id:match('^[^<].*[^>]$')then -- doesn't have '@' or has one or first or last character is '< or '>' text = text .. ' ' .. seterror( 'bad_message_id' ) -- add an error message if the message id is invalid end return text end --[[--------------------------< S E T _ T I T L E T Y P E >---------------------------------------------------- This function sets default title types (equivalent to the citation including |type=<default value>) for those citations that have defaults. Also handles the special case where it is desirable to omit the title type from the rendered citation (|type=none). ]] function set_titletype(cite_class, title_type) if is_set(title_type) then if "none" == title_type then title_type = ""; -- if |type=none then type parameter not displayed end return title_type; -- if |type= has been set to any other value use that value end if "AV-media-notes" == cite_class or "DVD-notes" == cite_class then -- if this citation is cite AV media notes or cite DVD notes return "یادداشتهای رسانهای"; -- display AV media notes / DVD media notes annotation elseif "mailinglist" == cite_class then -- if this citation is cite mailing list return "Mailing list"; -- display mailing list annotation elseif "podcast" == cite_class then -- if this citation is cite podcast return "پادکست"; -- display podcast annotation elseif "pressrelease" == cite_class then -- if this citation is cite press release return "انتشار مطبوعاتی"; -- display press release annotation elseif "report" == cite_class then -- if this citation is cite report return "Report"; -- display report annotation elseif "techreport" == cite_class then -- if this citation is cite techreport return "گزارش فنی"; -- display techreport annotation elseif "thesis" == cite_class then -- if this citation is cite thesis (degree option handled after this function returns) return "پایاننامه"; -- display simple thesis annotation (without |degree= modification) end end --[[ Determines whether a URL string is valid At present the only check is whether the string appears to be prefixed with a URI scheme. It is not determined whether the URI scheme is valid or whether the URL is otherwise well formed. ]] function checkurl( url_str ) -- Protocol-relative or URL scheme return url_str:sub(1,2) == "//" or url_str:match( "^[^/]*:" ) ~= nil; end -- Removes irrelevant text and dashes from ISBN number -- Similar to that used for Special:BookSources function cleanisbn( isbn_str ) return isbn_str:gsub( "[^-0-9X]", "" ); end --[[--------------------------< E S C A P E _ L U A _ M A G I C _ C H A R S >---------------------------------- Returns a string where all of lua's magic characters have been escaped. This is important because functions like string.gsub() treat their pattern and replace strings as patterns, not literal strings. ]] function escape_lua_magic_chars (argument) argument = argument:gsub("%%", "%%%%"); -- replace % with %% argument = argument:gsub("([%^%$%(%)%.%[%]%*%+%-%?])", "%%%1"); -- replace all other lua magic pattern characters return argument; end --[[--------------------------< S T R I P _ A P O S T R O P H E _ M A R K U P >-------------------------------- Strip wiki italic and bold markup from argument so that it doesn't contaminate COinS metadata. This function strips common patterns of apostrophe markup. We presume that editors who have taken the time to markup a title have, as a result, provided valid markup. When they don't, some single apostrophes are left behind. ]] function strip_apostrophe_markup (argument) if not is_set (argument) then return argument; end while true do if argument:match ("%'%'%'%'%'") then -- bold italic (5) argument=argument:gsub("%'%'%'%'%'", ""); -- remove all instances of it elseif argument:match ("%'%'%'%'") then -- italic start and end without content (4) argument=argument:gsub("%'%'%'%'", ""); elseif argument:match ("%'%'%'") then -- bold (3) argument=argument:gsub("%'%'%'", ""); elseif argument:match ("%'%'") then -- italic (2) argument=argument:gsub("%'%'", ""); else break; end end return argument; -- done end --[[--------------------------< M A K E _ C O I N S _ T I T L E >---------------------------------------------- Makes a title for COinS from Title and / or ScriptTitle (or any other name-script pairs) Apostrophe markup (bold, italics) is stripped from each value so that the COinS metadata isn't correupted with strings of %27%27... ]] function make_coins_title (title, script) if is_set (title) then title = strip_apostrophe_markup (title); -- strip any apostrophe markup else title=''; -- if not set, make sure title is an empty string end if is_set (script) then script = script:gsub ('^%l%l%s*:%s*', ''); -- remove language prefix if present (script value may now be empty string) script = strip_apostrophe_markup (script); -- strip any apostrophe markup else script=''; -- if not set, make sure script is an empty string end if is_set (title) and is_set (script) then script = ' ' .. script; -- add a space before we concatenate end return title .. script; -- return the concatenation end --[[--------------------------< G E T _ C O I N S _ P A G E S >------------------------------------------------ Extract page numbers from external wikilinks in any of the |page=, |pages=, or |at= parameters for use in COinS. ]] function get_coins_pages (pages) local pattern; if not is_set (pages) then return pages; end -- if no page numbers then we're done while true do pattern = pages:match("%[(%w*:?//[^ ]+%s+)[%w%d].*%]"); -- pattern is the opening bracket, the url and following space(s): "[url " if nil == pattern then break; end -- no more urls pattern = escape_lua_magic_chars (pattern); -- pattern is not a literal string; escape lua's magic pattern characters pages = pages:gsub(pattern, ""); -- remove as many instances of pattern as possible end pages = pages:gsub("[%[%]]", ""); -- remove the brackets pages = pages:gsub("–", "-" ); -- replace endashes with hyphens pages = pages:gsub("&%w+;", "-" ); -- and replace html entities (– etc.) with hyphens; do we need to replace numerical entities like   and the like? return pages; end --[[ ISBN-10 and ISSN validator code calculates checksum across all isbn/issn digits including the check digit. ISBN-13 is checked in checkisbn(). If the number is valid the result will be 0. Before calling this function, issbn/issn must be checked for length and stripped of dashes, spaces and other non-isxn characters. ]] function is_valid_isxn (isxn_str, len) local temp = 0; isxn_str = { isxn_str:byte(1, len) }; -- make a table of bytes len = len+1; -- adjust to be a loop counter for i, v in ipairs( isxn_str ) do -- loop through all of the bytes and calculate the checksum if v == string.byte( "X" ) then -- if checkdigit is X temp = temp + 10*( len - i ); -- it represents 10 decimal else temp = temp + tonumber( string.char(v) )*(len-i); end end return temp % 11 == 0; -- returns true if calculation result is zero end -- Determines whether an ISBN string is valid function checkisbn( isbn_str ) if nil ~= isbn_str:match("[^%s-0-9X]") then return false; end -- fail if isbn_str contains anything but digits, hyphens, or the uppercase X isbn_str = isbn_str:gsub( "-", "" ):gsub( " ", "" ); -- remove hyphens and spaces local len = isbn_str:len(); if len ~= 10 and len ~= 13 then return false; end if len == 10 then if isbn_str:match( "^%d*X?$" ) == nil then return false; end return is_valid_isxn(isbn_str, 10); else local temp = 0; if isbn_str:match( "^97[89]%d*$" ) == nil then return false; end -- isbn13 begins with 978 or 979 isbn_str = { isbn_str:byte(1, len) }; for i, v in ipairs( isbn_str ) do temp = temp + (3 - 2*(i % 2)) * tonumber( string.char(v) ); end return temp % 10 == 0; end end -- Gets the display text for a wikilink like [[A|B]] or [[B]] gives B function removewikilink( str ) return (str:gsub( "%[%[([^%[%]]*)%]%]", function(l) return l:gsub( "^[^|]*|(.*)$", "%1" ):gsub("^%s*(.-)%s*$", "%1"); end)); end -- Escape sequences for content that will be used for URL descriptions function safeforurl( str ) if str:match( "%[%[.-%]%]" ) ~= nil then table.insert( z.message_tail, { seterror( 'wikilink_in_url', {}, true ) } ); end return str:gsub( '[%[%]\n]', { ['['] = '[', [']'] = ']', ['\n'] = ' ' } ); end -- Converts a hyphen to a dash function hyphentodash( str ) if not is_set(str) or str:match( "[%[%]{}<>]" ) ~= nil then return str; end return str:gsub( '-', '–' ); end -- Protects a string that will be wrapped in wiki italic markup '' ... '' function safeforitalics( str ) --[[ Note: We cannot use <i> for italics, as the expected behavior for italics specified by ''...'' in the title is that they will be inverted (i.e. unitalicized) in the resulting references. In addition, <i> and '' tend to interact poorly under Mediawiki's HTML tidy. ]] if not is_set(str) then return str; else if str:sub(1,1) == "'" then str = "<span />" .. str; end if str:sub(-1,-1) == "'" then str = str .. "<span />"; end -- Remove newlines as they break italics. return str:gsub( '\n', ' ' ); end end --[[--------------------------< S A F E J O I N >-------------------------------------------------------------- Joins a sequence of strings together while checking for duplicate separation characters. ]] function safejoin( tbl, duplicate_char ) --[[ Note: we use string functions here, rather than ustring functions. This has considerably faster performance and should work correctly as long as the duplicate_char is strict ASCII. The strings in tbl may be ASCII or UTF8. ]] local str = ''; -- the output string local comp = ''; -- what does 'comp' mean? local end_chr = ''; local trim; for _, value in ipairs( tbl ) do if value == nil then value = ''; end if str == '' then -- if output string is empty str = value; -- assign value to it (first time through the loop) elseif value ~= '' then if value:sub(1,1) == '<' then -- Special case of values enclosed in spans and other markup. comp = value:gsub( "%b<>", "" ); -- remove html markup (<span>string</span> -> string) else comp = value; end -- typically duplicate_char is sepc if comp:sub(1,1) == duplicate_char then -- is first charactier same as duplicate_char? why test first character? -- Because individual string segments often (always?) begin with terminal punct for th -- preceding segment: 'First element' .. 'sepc next element' .. etc? trim = false; end_chr = str:sub(-1,-1); -- get the last character of the output string -- str = str .. "<HERE(enchr=" .. end_chr.. ")" -- debug stuff? if end_chr == duplicate_char then -- if same as separator str = str:sub(1,-2); -- remove it elseif end_chr == "'" then -- if it might be wikimarkup if str:sub(-3,-1) == duplicate_char .. "''" then -- if last three chars of str are sepc'' str = str:sub(1, -4) .. "''"; -- remove them and add back '' elseif str:sub(-5,-1) == duplicate_char .. "]]''" then -- if last five chars of str are sepc]]'' trim = true; -- why? why do this and next differently from previous? elseif str:sub(-4,-1) == duplicate_char .. "]''" then -- if last four chars of str are sepc]'' trim = true; -- same question end elseif end_chr == "]" then -- if it might be wikimarkup if str:sub(-3,-1) == duplicate_char .. "]]" then -- if last three chars of str are sepc]] wikilink trim = true; elseif str:sub(-2,-1) == duplicate_char .. "]" then -- if last two chars of str are sepc] external link trim = true; elseif str:sub(-4,-1) == duplicate_char .. "'']" then -- normal case when |url=something & |title=Title. trim = true; end elseif end_chr == " " then -- if last char of output string is a space if str:sub(-2,-1) == duplicate_char .. " " then -- if last two chars of str are <sepc><space> str = str:sub(1,-3); -- remove them both end end if trim then if value ~= comp then -- value does not equal comp when value contains html markup local dup2 = duplicate_char; if dup2:match( "%A" ) then dup2 = "%" .. dup2; end -- if duplicate_char not a letter then escape it value = value:gsub( "(%b<>)" .. dup2, "%1", 1 ) -- remove duplicate_char if it follows html markup else value = value:sub( 2, -1 ); -- remove duplicate_char when it is first character end end end str = str .. value; --add it to the output string end end return str; end -- Attempts to convert names to initials. function reducetoinitials(first) local initials = {} local i = 0; -- counter for number of initials for word in string.gmatch(first, "%S+") do table.insert(initials, string.sub(word,1,1)) -- Vancouver format does not include full stops. i = i + 1; -- bump the counter if 2 <= i then break; end -- only two initials allowed in Vancouver system; if 2, quit end return table.concat(initials) -- Vancouver format does not include spaces. end -- Formats a list of people (e.g. authors / editors) function listpeople(control, people) local sep; local namesep; local format = control.format local maximum = control.maximum local lastauthoramp = control.lastauthoramp; local text = {} local etal = false; if 'vanc' == format then -- Vancouver-like author/editor name styling? sep = ','; -- name-list separator between authors is a comma namesep = ' '; -- last/first separator is a space else sep = ';' -- name-list separator between authors is a semicolon namesep = ', ' -- last/first separator is <comma><space> end if sep:sub(-1,-1) ~= " " then sep = sep .. " " end if maximum ~= nil and maximum < 1 then return "", 0; end for i,person in ipairs(people) do if is_set(person.last) then local mask = person.mask local one local sep_one = sep; if maximum ~= nil and i > maximum then etal = true; break; elseif (mask ~= nil) then local n = tonumber(mask) if (n ~= nil) then one = string.rep("—",n) else one = mask; sep_one = " "; end else one = person.last local first = person.first if is_set(first) then if ( "vanc" == format ) then first = reducetoinitials(first) end one = one .. namesep .. first end if is_set(person.link) and person.link ~= control.page_name then one = "[[" .. person.link .. "|" .. one .. "]]" -- link author/editor if this page is not the author's/editor's page end if is_set(person.link) and ((nil ~= person.link:find("//")) or (nil ~= person.link:find("[%[%]]"))) then one = one .. " " .. seterror( 'bad_authorlink' ) end -- url or wikilink in author link; end table.insert( text, one ) table.insert( text, sep_one ) end end local count = #text / 2; if count > 0 then if count > 1 and is_set(lastauthoramp) and not etal then text[#text-2] = " & "; end text[#text] = nil; end local result = table.concat(text) -- construct list if etal then local etal_text = cfg.messages['et al']; result = result .. " " .. etal_text; end return result, count end --[[--------------------------< A N C H O R I D >-------------------------------------------------------------- Generates a CITEREF anchor ID if we have at least one name or a date. Otherwise returns an empty string. ]] function anchorid( options ) local id = table.concat( options ); -- concatenate names and year for CITEREF id if is_set (id) then -- if concatenation is not an empty string return "CITEREF" .. id; -- add the CITEREF portion else return ''; -- return an empty string; no reason to include CITEREF id in this citation end end --[[ Gets name list from the input arguments Searches through args in sequential order to find |lastn= and |firstn= parameters (or their aliases), and their matching link and mask parameters. Stops searching when both |lastn= and |firstn= are not found in args after two sequential attempts: found |last1=, |last2=, and |last3= but doesn't find |last4= and |last5= then the search is done. This function emits an error message when there is a |firstn= without a matching |lastn=. When there are 'holes' in the list of last names, |last1= and |last3= are present but |last2= is missing, an error message is emitted. |lastn= is not required to have a matching |firstn=. ]] function extractnames(args, list_name) local names = {}; -- table of names local last; -- individual name components local first; local link; local mask; local i = 1; -- loop counter/indexer local n = 1; -- output table indexer local count = 0; -- used to count the number of times we haven't found a |last= (or alias for authors, |editor-last or alias for editors) local err_msg_list_name = list_name:match ("(%w+)List") .. 's list'; -- modify AuthorList or EditorList for use in error messages if necessary while true do last = selectone( args, cfg.aliases[list_name .. '-Last'], 'redundant_parameters', i ); -- search through args for name components beginning at 1 first = selectone( args, cfg.aliases[list_name .. '-First'], 'redundant_parameters', i ); link = selectone( args, cfg.aliases[list_name .. '-Link'], 'redundant_parameters', i ); mask = selectone( args, cfg.aliases[list_name .. '-Mask'], 'redundant_parameters', i ); if first and not last then -- if there is a firstn without a matching lastn table.insert( z.message_tail, { seterror( 'first_missing_last', {err_msg_list_name, i}, true ) } ); -- add this error message elseif not first and not last then -- if both firstn and lastn aren't found, are we done? count = count + 1; -- number of times we haven't found last and first if 2 == count then -- two missing names and we give up break; -- normal exit or there is a two-name hole in the list; can't tell which end else -- we have last with or without a first names[n] = {last = last, first = first, link = link, mask = mask}; -- add this name to our names list n = n + 1; -- point to next location in the names table if 1 == count then -- if the previous name was missing table.insert( z.message_tail, { seterror( 'missing_name', {err_msg_list_name, i-1}, true ) } ); -- add this error message end count = 0; -- reset the counter, we're looking for two consecutive missing names end i = i + 1; -- point to next args location end return names; -- all done, return our list of names end -- Populates ID table from arguments using configuration settings function extractids( args ) local id_list = {}; for k, v in pairs( cfg.id_handlers ) do v = selectone( args, v.parameters, 'redundant_parameters' ); if is_set(v) then id_list[k] = v; end end return id_list; end --[[--------------------------< B U I L D I D L I S T >-------------------------------------------------------- Takes a table of IDs and turns it into a table of formatted ID outputs. ]] function buildidlist( id_list, options ) local new_list, handler = {}; function fallback(k) return { __index = function(t,i) return cfg.id_handlers[k][i] end } end; for k, v in pairs( id_list ) do -- fallback to read-only cfg handler = setmetatable( { ['id'] = v }, fallback(k) ); if handler.mode == 'external' then table.insert( new_list, {handler.label, externallinkid( handler ) } ); elseif handler.mode == 'internal' then table.insert( new_list, {handler.label, internallinkid( handler ) } ); elseif handler.mode ~= 'manual' then error( cfg.messages['unknown_ID_mode'] ); elseif k == 'DOI' then table.insert( new_list, {handler.label, doi( v, options.DoiBroken ) } ); elseif k == 'ARXIV' then table.insert( new_list, {handler.label, arxiv( v ) } ); elseif k == 'ASIN' then table.insert( new_list, {handler.label, amazon( v, options.ASINTLD ) } ); elseif k == 'LCCN' then table.insert( new_list, {handler.label, lccn( v ) } ); elseif k == 'OL' then table.insert( new_list, {handler.label, openlibrary( v ) } ); elseif k == 'PMC' then table.insert( new_list, {handler.label, pmc( v, options.Embargo ) } ); elseif k == 'PMID' then table.insert( new_list, {handler.label, pmid( v ) } ); elseif k == 'ISSN' then table.insert( new_list, {handler.label, issn( v ) } ); elseif k == 'ISBN' then local ISBN = internallinkid( handler ); if not checkisbn( v ) and not is_set(options.IgnoreISBN) then ISBN = ISBN .. seterror( 'bad_isbn', {}, false, " ", "" ); end table.insert( new_list, {handler.label, ISBN } ); elseif k == 'USENETID' then table.insert( new_list, {handler.label, message_id( v ) } ); else error( cfg.messages['unknown_manual_ID'] ); end end function comp( a, b ) -- used in following table.sort() return a[1] < b[1]; end table.sort( new_list, comp ); for k, v in ipairs( new_list ) do new_list[k] = v[2]; end return new_list; end -- Chooses one matching parameter from a list of parameters to consider -- Generates an error if more than one match is present. function selectone( args, possible, error_condition, index ) local value = nil; local selected = ''; local error_list = {}; if index ~= nil then index = tostring(index); end -- Handle special case of "#" replaced by empty string if index == '1' then for _, v in ipairs( possible ) do v = v:gsub( "#", "" ); if is_set(args[v]) then if value ~= nil and selected ~= v then table.insert( error_list, v ); else value = args[v]; selected = v; end end end end for _, v in ipairs( possible ) do if index ~= nil then v = v:gsub( "#", index ); end if is_set(args[v]) then if value ~= nil and selected ~= v then table.insert( error_list, v ); else value = args[v]; selected = v; end end end if #error_list > 0 then local error_str = ""; for _, k in ipairs( error_list ) do if error_str ~= "" then error_str = error_str .. cfg.messages['parameter-separator'] end error_str = error_str .. wrap_style ('parameter', k); end if #error_list > 1 then error_str = error_str .. cfg.messages['parameter-final-separator']; else error_str = error_str .. cfg.messages['parameter-pair-separator']; end error_str = error_str .. wrap_style ('parameter', selected); table.insert( z.message_tail, { seterror( error_condition, {error_str}, true ) } ); end return value, selected; end -- COinS metadata (see <http://ocoins.info/>) allows automated tools to parse -- the citation information. function COinS(data) if 'table' ~= type(data) or nil == next(data) then return ''; end local ctx_ver = "Z39.88-2004"; -- treat table strictly as an array with only set values. local OCinSoutput = setmetatable( {}, { __newindex = function(self, key, value) if is_set(value) then rawset( self, #self+1, table.concat{ key, '=', mw.uri.encode( removewikilink( value ) ) } ); end end }); if is_set(data.Chapter) then OCinSoutput.rft_val_fmt = "info:ofi/fmt:kev:mtx:book"; OCinSoutput["rft.genre"] = "bookitem"; OCinSoutput["rft.atitle"] = data.Chapter; OCinSoutput["rft.btitle"] = data.Title; elseif is_set(data.Periodical) then OCinSoutput.rft_val_fmt = "info:ofi/fmt:kev:mtx:journal"; OCinSoutput["rft.genre"] = "article"; OCinSoutput["rft.jtitle"] = data.Periodical; OCinSoutput["rft.atitle"] = data.Title; else OCinSoutput.rft_val_fmt = "info:ofi/fmt:kev:mtx:book"; OCinSoutput["rft.genre"] = "book" OCinSoutput["rft.btitle"] = data.Title; end OCinSoutput["rft.place"] = data.PublicationPlace; OCinSoutput["rft.date"] = data.Date; OCinSoutput["rft.series"] = data.Series; OCinSoutput["rft.volume"] = data.Volume; OCinSoutput["rft.issue"] = data.Issue; OCinSoutput["rft.pages"] = data.Pages; OCinSoutput["rft.edition"] = data.Edition; OCinSoutput["rft.pub"] = data.PublisherName; for k, v in pairs( data.ID_list ) do local id, value = cfg.id_handlers[k].COinS; if k == 'ISBN' then value = cleanisbn( v ); else value = v; end if string.sub( id or "", 1, 4 ) == 'info' then OCinSoutput["rft_id"] = table.concat{ id, "/", v }; else OCinSoutput[ id ] = value; end end local last, first; for k, v in ipairs( data.Authors ) do last, first = v.last, v.first; if k == 1 then if is_set(last) then OCinSoutput["rft.aulast"] = last; end if is_set(first) then OCinSoutput["rft.aufirst"] = first; end end if is_set(last) and is_set(first) then OCinSoutput["rft.au"] = table.concat{ last, ", ", first }; elseif is_set(last) then OCinSoutput["rft.au"] = last; end end OCinSoutput.rft_id = data.URL; OCinSoutput.rfr_id = table.concat{ "info:sid/", mw.site.server:match( "[^/]*$" ), ":", data.RawPage }; OCinSoutput = setmetatable( OCinSoutput, nil ); -- sort with version string always first, and combine. table.sort( OCinSoutput ); table.insert( OCinSoutput, 1, "ctx_ver=" .. ctx_ver ); -- such as "Z39.88-2004" return table.concat(OCinSoutput, "&"); end --[[--------------------------< G E T _ I S O 6 3 9 _ C O D E >------------------------------------------------ Validates language names provided in |language= parameter if not an ISO639-1 code. Handles the special case that is Norwegian where ISO639-1 code 'no' is mapped to language name 'Norwegian Bokmål' by Extention:CLDR. Returns the language name and associated ISO639-1 code. Because case of the source may be incorrect or different from the case that Wikimedia uses, the name comparisons are done in lower case and when a match is found, the Wikimedia version (assumed to be correct) is returned along with the code. When there is no match, we return the original language name string. mw.language.fetchLanguageNames() will return a list of languages that aren't part of ISO639-1. Names that aren't ISO639-1 but that are included in the list will be found if that name is provided in the |language= parameter. For example, if |language=Samaritan Aramaic, that name will be found with the associated code 'sam', not an ISO639-1 code. When names are found and the associated code is not two characters, this function returns only the Wikimedia language name. Adapted from code taken from Module:Check ISO 639-1. ]] function get_iso639_code (lang) if 'norwegian' == lang:lower() then -- special case related to Wikimedia remap of code 'no' at Extension:CLDR return 'Norwegian', 'no'; -- Make sure rendered version is properly capitalized end local languages = mw.language.fetchLanguageNames('en', 'all') -- get a list of language names known to Wikimedia -- ('all' is required for North Ndebele, South Ndebele, and Ojibwa) local langlc = mw.ustring.lower(lang); -- lower case version for comparisons for code, name in pairs(languages) do -- scan the list to see if we can find our language if langlc == mw.ustring.lower(name) then if 2 ~= code:len() then -- ISO639-1 codes only return name; -- so return the name but not the code end return name, code; -- found it, return name to ensure proper capitalization and the ISO639-1 code end end return lang; -- not valid language; return language in original case and nil for ISO639-1 code end --[[--------------------------< L A N G U A G E _ P A R A M E T E R >------------------------------------------ Get language name from ISO639-1 code value provided. If a code is valid use the returned name; if not, then use the value that was provided with the language parameter. There is an exception. There are three ISO639-1 codes for Norewegian language variants. There are two official variants: Norwegian Bokmål (code 'nb') and Norwegian Nynorsk (code 'nn'). The third, code 'no', is defined by ISO639-1 as 'Norwegian' though in Norway this is pretty much meaningless. However, it appears that on enwiki, editors are for the most part unaware of the nb and nn variants (compare page counts for these variants at Category:Articles with non-English-language external links. Because Norwegian Bokmål is the most common language variant, Media wiki has been modified to return Norwegian Bokmål for ISO639-1 code 'no'. Here we undo that and return 'Norwegian' when editors use |language=no. We presume that editors don't know about the variants or can't descriminate between them. See Help talk:Citation Style_1#An ISO 639-1 language name test When |language= contains a valid ISO639-1 code, the page is assigned to the category for that code: Category:Norwegian-language sources (no) if the page is a mainspace page and the ISO639-1 code is not 'en'. Similarly, if the parameter is |language=Norwegian, it will be categorized in the same way. ]] function language_parameter (lang, namespace) local code; -- the ISO639-1 two character code local name; -- the language name local test=''; if 0 == namespace and (('en' == lang:lower()) or ('english' == lang:lower())) then table.insert (z.maintenance_cats, 'CS1 maint: English language specified'); -- add maintenance category if |language=English or |language=en in article space end if 2 == lang:len() then -- ISO639-1 language code are 2 characters (fetchLanguageName also supports 3 character codes) name = mw.language.fetchLanguageName( lang:lower(), "en" ); -- get ISO 639-1 language name if Language is a proper code end if is_set (name) then -- if Language specified a valid ISO639-1 code code = lang:lower(); -- save it else name, code = get_iso639_code (lang); -- attempt to get code from name (assign name here so that we are sure of proper capitalization) end if is_set (code) then if 'no' == code then name = 'Norwegian' end; -- override wikimedia when code is 'no' if 0 == namespace and 'en' ~= code then -- is this page main / article space and English not the language? -- خط زیر برای اطمینان از نام فارسی زبان نوشته شدهاست local nameInFa = mw.language.fetchLanguageName(code, 'fa') -- در خط زیر جای متغیر name که مقدار انگلیسی دارد از nameInFa استفاده شدهاست. table.insert( z.properties_cats, 'منابع به زبان ' .. nameInFa .. ' در شیوه یادکرد ۱ (' .. code .. ')'); -- in main space and not English: categorize end else table.insert (z.maintenance_cats, 'CS1 maint: Unrecognized language'); -- add maintenance category when |language= does not appear to be ISO 639-1 language end return (" " .. wrap_msg ('language', name)); -- wrap with '(in ...)' end --[[--------------------------< G E T _ S E T T I N G S _ F R O M _ C I T E _ C L A S S >---------------------- When |mode= is not set or when its value is invalid, use config.CitationClass and parameter values to establish rendered style. ]] function get_settings_from_cite_class (ps, ref, cite_class) local sep; if (cite_class == "citation") then -- for citation templates (CS2) sep = ','; -- set citation separator to its default (comma) if not is_set (ps) then -- if |postscript= has not been set, set cs2 default ps = ''; -- make sure it isn't nil end if not is_set (ref) then -- if |ref= is not set ref = "harv"; -- set default |ref=harv end else -- not a citation template so CS1 sep = '.'; -- set cite xxx separator to its default (period) if not is_set (ps) then -- if |postscript= has not been set ps = '.'; -- set cs1 default end end return sep, ps, ref -- return them all end --[[--------------------------< S E T _ S T Y L E >------------------------------------------------------------ Establish basic style settings to be used when rendering the citation. Uses |mode= if set and valid or uses config.CitationClass from the template's #invoke: to establish style. ]] function set_style (mode, ps, ref, cite_class) local sep; if is_set (mode) then if 'cs2' == mode then -- if this template is to be rendered in CS2 (citation) style sep = ','; -- separate elements with a comma if not is_set (ps) then -- unless explicitely set to something ps = ''; -- make sure it isn't nil end if not is_set (ref) then -- unless explicitely set to something ref = 'harv'; -- set so this template renders with CITEREF anchor id end elseif 'cs1' == mode then -- if this template is to be rendered in CS1 (cite xxx) style sep = '.'; -- separate elements with a period if not is_set (ps) then -- unless explicitely set to something ps = '.'; -- terminate the rendered citation with a period end else -- anything but cs1 or cs2 table.insert( z.message_tail, { seterror( 'invalid_param_val', {'mode', mode}, true ) } ); -- add error message sep, ps, ref = get_settings_from_cite_class (ps, ref, cite_class); -- get settings based on the template's CitationClass end else -- when |mode= empty or omitted sep, ps, ref = get_settings_from_cite_class (ps, ref, cite_class); -- get settings based on the template's CitationClass end if 'none' == ps:lower() then -- if assigned value is 'none' then ps = ''; -- set to empty string end return sep, ps, ref end --[[--------------------------< C I T A T I O N 0 >------------------------------------------------------------ This is the main function doing the majority of the citation formatting. ]] function citation0( config, args) --[[ Load Input Parameters The argument_wrapper facilitates the mapping of multiple aliases to single internal variable. ]] local A = argument_wrapper( args ); local i local PPrefix = A['PPrefix'] local PPPrefix = A['PPPrefix'] if is_set( A['NoPP'] ) then PPPrefix = "" PPrefix = "" end -- Pick out the relevant fields from the arguments. Different citation templates -- define different field names for the same underlying things. local Authors = A['Authors']; local a = extractnames( args, 'AuthorList' ); local Coauthors = A['Coauthors']; local Others = A['Others']; local Editors = A['Editors']; local e = extractnames( args, 'EditorList' ); local NameListFormat = A['NameListFormat']; -- replaces |author-format= and |editor-format= if is_set (NameListFormat) and ('vanc' ~= NameListFormat) then -- only accepted value for this parameter is 'vanc' table.insert( z.message_tail, { seterror( 'invalid_param_val', {'name-list-format', NameListFormat}, true ) } ); -- not vanc so add error message NameListFormat = ''; -- set to empty string end local Year = A['Year']; local PublicationDate = A['PublicationDate']; local OrigYear = A['OrigYear']; local Date = A['Date']; local LayDate = A['LayDate']; ------------------------------------------------- Get title data local Title = A['Title']; local ScriptTitle = A['ScriptTitle']; local BookTitle = A['BookTitle']; local Conference = A['Conference']; local TransTitle = A['TransTitle']; local TitleNote = A['TitleNote']; local TitleLink = A['TitleLink']; local Chapter = A['Chapter']; local ChapterLink = A['ChapterLink']; -- deprecated local TransChapter = A['TransChapter']; local TitleType = A['TitleType']; local Degree = A['Degree']; local Docket = A['Docket']; local ArchiveURL = A['ArchiveURL']; local URL = A['URL'] local URLorigin = A:ORIGIN('URL'); -- get name of parameter that holds URL local ChapterURL = A['ChapterURL']; local ChapterURLorigin = A:ORIGIN('ChapterURL'); -- get name of parameter that holds ChapterURL local ConferenceURL = A['ConferenceURL']; local ConferenceURLorigin = A:ORIGIN('ConferenceURL'); -- get name of parameter that holds ConferenceURL local Periodical = A['Periodical']; local Series = A['Series']; local Volume = A['Volume']; local Issue = A['Issue']; local Position = ''; local Page = A['Page']; local Pages = hyphentodash( A['Pages'] ); local At = A['At']; local Edition = A['Edition']; local PublicationPlace = A['PublicationPlace'] local Place = A['Place']; local PublisherName = A['PublisherName']; local RegistrationRequired = A['RegistrationRequired']; local SubscriptionRequired = A['SubscriptionRequired']; local Via = A['Via']; local AccessDate = A['AccessDate']; local ArchiveDate = A['ArchiveDate']; local Agency = A['Agency']; local DeadURL = A['DeadURL'] local Language = A['Language']; local Format = A['Format']; local ChapterFormat = A['ChapterFormat']; local DoiBroken = A['DoiBroken']; local ID = A['ID']; local ASINTLD = A['ASINTLD']; local IgnoreISBN = A['IgnoreISBN']; local Embargo = A['Embargo']; local ID_list = extractids( args ); local Quote = A['Quote']; local LayURL = A['LayURL']; local LaySource = A['LaySource']; local Transcript = A['Transcript']; local TranscriptURL = A['TranscriptURL'] local TranscriptURLorigin = A:ORIGIN('TranscriptURL'); -- get name of parameter that holds TranscriptURL local LastAuthorAmp = A['LastAuthorAmp']; local no_tracking_cats = A['NoTracking']; --these are used by cite interview local Callsign = A['Callsign']; local City = A['City']; local Program = A['Program']; --local variables that are not cs1 parameters local use_lowercase; -- controls capitalization of certain static text local this_page = mw.title.getCurrentTitle(); -- also used for COinS and for language local anchor_year; -- used in the CITEREF identifier local COinS_date; -- used in the COinS metadata -- set default parameter values defined by |mode= parameter. If |mode= is empty or omitted, use CitationClass to set these values local sepc; -- separator between citation elements for CS1 a period, for CS2, a comma local PostScript; local Ref; sepc, PostScript, Ref = set_style (A['Mode']:lower(), A['PostScript'], A['Ref'], config.CitationClass); use_lowercase = ( sepc == ',' ); -- used to control capitalization for certain static text --check this page to see if it is in one of the namespaces that cs1 is not supposed to add to the error categories. if not is_set(no_tracking_cats) then -- ignore if we are already not going to categorize this page if inArray (this_page.nsText, cfg.uncategorized_namespaces) then no_tracking_cats = "true"; -- set no_tracking_cats end end -- check for extra |page=, |pages= or |at= parameters. if is_set(Page) then if is_set(Pages) or is_set(At) then Page = Page .. " " .. seterror('extra_pages'); -- add error message Pages = ''; -- unset the others At = ''; end elseif is_set(Pages) then if is_set(At) then Pages = Pages .. " " .. seterror('extra_pages'); -- add error messages At = ''; -- unset end end -- both |publication-place= and |place= (|location=) allowed if different if not is_set(PublicationPlace) and is_set(Place) then PublicationPlace = Place; -- promote |place= (|location=) to |publication-place end if PublicationPlace == Place then Place = ''; end -- don't need both if they are the same --[[ Parameter remapping for cite encyclopedia: When the citation has these parameters: |encyclopedia and |title then map |title to |article and |encyclopedia to |title |encyclopedia and |article then map |encyclopedia to |title |encyclopedia then map |encyclopedia to |title |trans_title maps to |trans_chapter when |title is re-mapped |url maps to |chapterurl when |title is remapped All other combinations of |encyclopedia, |title, and |article are not modified TODO: script-title to script-chapter if and when we support script-chapter ]] local Encyclopedia = A['Encyclopedia']; if ( config.CitationClass == "encyclopaedia" ) or ( config.CitationClass == "citation" and is_set (Encyclopedia)) then -- test code for citation if is_set(Periodical) then -- Periodical is set when |encyclopedia is set if is_set(Title) then if not is_set(Chapter) then Chapter = Title; -- |encyclopedia and |title are set so map |title to |article and |encyclopedia to |title TransChapter = TransTitle; ChapterURL = URL; Title = Periodical; ChapterFormat = Format; Periodical = ''; -- redundant so unset TransTitle = ''; -- redundant so unset URL = ''; -- redundant so unset Format = ''; -- redundant so unset end else -- |title not set Title = Periodical; -- |encyclopedia set and |article set or not set so map |encyclopedia to |title Periodical = ''; -- redundant so unset end end end -- Special case for cite techreport. if (config.CitationClass == "techreport") then -- special case for cite techreport if is_set(Issue) then -- cite techreport uses 'number', which other citations aliase to 'issue' if not is_set(ID) then -- can we use ID for the "number"? ID = Issue; -- yes, use it Issue = ""; -- unset Issue so that "number" isn't duplicated in the rendered citation or COinS metadata else -- can't use ID so emit error message ID = ID .. " " .. seterror('redundant_parameters', '<code>|id=</code> and <code>|number=</code>'); end end end -- special case for cite interview if (config.CitationClass == "interview") then if is_set(Program) then ID = ' ' .. Program; end if is_set(Callsign) then if is_set(ID) then ID = ID .. sepc .. ' ' .. Callsign; else ID = ' ' .. Callsign; end end if is_set(City) then if is_set(ID) then ID = ID .. sepc .. ' ' .. City; else ID = ' ' .. City; end end if is_set(Others) then if is_set(TitleType) then Others = ' ' .. TitleType .. ' با ' .. Others; TitleType = ''; else Others = ' ' .. 'مصاحبه با ' .. Others; end else Others = '(مصاحبه)'; end end -- special case for cite mailing list if (config.CitationClass == "mailinglist") then Periodical = A ['MailingList']; end --Account for the oddity that is {{cite journal}} with |pmc= set and |url= not set if config.CitationClass == "journal" and not is_set(URL) and is_set(ID_list['PMC']) then if not is_embargoed(Embargo) then URL=cfg.id_handlers['PMC'].prefix .. ID_list['PMC']; -- set url to be the same as the PMC external link if not embargoed URLorigin = cfg.id_handlers['PMC'].parameters[1]; -- set URLorigin to parameter name for use in error message if citation is missing a |title= end end -- Account for the oddity that is {{cite conference}}, before generation of COinS data. if 'conference' == config.CitationClass then if is_set(BookTitle) then Chapter = Title; -- ChapterLink = TitleLink; -- |chapterlink= is deprecated ChapterURL = URL; ChapterURLorigin = URLorigin; URLorigin = ''; ChapterFormat = Format; TransChapter = TransTitle; Title = BookTitle; Format = ''; -- TitleLink = ''; TransTitle = ''; URL = ''; end else Conference = ''; -- not cite conference so make sure this is empty string end -- Account for the oddity that is {{cite episode}}, before generation of COinS data. --[[ -- {{cite episode}} is not currently supported by this module if config.CitationClass == "episode" then local AirDate = A['AirDate']; local SeriesLink = A['SeriesLink']; local Season = A['Season']; local SeriesNumber = A['SeriesNumber']; local Network = A['Network']; local Station = A['Station']; local s, n = {}, {}; local Sep = (first_set(A["SeriesSeparator"], A["Separator"]) or "") .. " "; if is_set(Issue) then table.insert(s, cfg.messages["episode"] .. " " .. Issue); Issue = ''; end if is_set(Season) then table.insert(s, cfg.messages["season"] .. " " .. Season); end if is_set(SeriesNumber) then table.insert(s, cfg.messages["series"] .. " " .. SeriesNumber); end if is_set(Network) then table.insert(n, Network); end if is_set(Station) then table.insert(n, Station); end Date = Date or AirDate; Chapter = Title; ChapterLink = TitleLink; TransChapter = TransTitle; Title = Series; TitleLink = SeriesLink; TransTitle = ''; Series = table.concat(s, Sep); ID = table.concat(n, Sep); end -- end of {{cite episode}} stuff]] -- legacy: promote concatenation of |month=, and |year= to Date if Date not set; or, promote PublicationDate to Date if neither Date nor Year are set. if is_set(Date) then if is_set (Year) then table.insert( z.maintenance_cats, "CS1 maint: Date and year"); -- add to maint category end else Date = Year; -- promote Year to Date Year = nil; -- make nil so Year as empty string isn't used for CITEREF if is_set(Date) then local Month = A['Month']; if is_set(Month) then Date = Month .. " " .. Date; end elseif is_set(PublicationDate) then -- use PublicationDate when |date= and |year= are not set Date = PublicationDate; -- promote PublicationDate to Date PublicationDate = ''; -- unset, no longer needed end end if PublicationDate == Date then PublicationDate = ''; end -- if PublicationDate is same as Date, don't display in rendered citation --[[ Go test all of the date-holding parameters for valid MOS:DATE format and make sure that dates are real dates. This must be done before we do COinS because here is where we get the date used in the metadata. Date validation supporting code is in Module:Citation/CS1/Date_validation ]] anchor_year, COinS_date, error_message = dates({['accessdate']=AccessDate, ['airdate']=AirDate, ['archivedate']=ArchiveDate, ['date']=Date, ['doi_brokendate']=DoiBroken, ['embargo']=Embargo, ['laydate']=LayDate, ['publicationdate']=PublicationDate, ['year']=Year}); if is_set(error_message) then table.insert( z.message_tail, { seterror( 'bad_date', {error_message}, true ) } ); -- add this error message end -- At this point fields may be nil if they weren't specified in the template use. We can use that fact. -- Test if citation has no title if not is_set(Title) and -- not is_set(Periodical) and -- not a title -- not is_set(Conference) and -- not a title not is_set(TransTitle) and not is_set(ScriptTitle) then table.insert( z.message_tail, { seterror( 'citation_missing_title', {}, true ) } ); end if 'none' == Title and is_set(Periodical) and not (( config.CitationClass == "encyclopaedia" ) or ( config.CitationClass == "citation" and is_set (Encyclopedia))) then -- special case Title = ''; -- set title to empty string table.insert( z.maintenance_cats, "CS1 maint: Untitled periodical"); -- add to maint category end -- COinS metadata (see <http://ocoins.info/>) for automated parsing of citation information. -- handle the oddity that is cite encyclopedia and {{citation |encyclopedia=something}}. Here we presume that -- when Periodical, Title, and Chapter are all set, then Periodical is the book (encyclopedia) title, Title -- is the article title, and Chapter is a section within the article. So, we remap local coins_chapter = Chapter; -- default assuming that remapping not required local coins_title = Title; -- et tu if 'encyclopaedia' == config.CitationClass or ('citation' == config.CitationClass and is_set (Encyclopedia)) then if is_set (Chapter) and is_set (Title) and is_set (Periodical) then -- if all are used then coins_chapter = Title; -- remap coins_title = Periodical; end end -- this is the function call to COinS() local OCinSoutput = COinS{ ['Periodical'] = Periodical, ['Chapter'] = strip_apostrophe_markup (coins_chapter), -- Chapter stripped of bold / italic wikimarkup ['Title'] = make_coins_title (coins_title, ScriptTitle), -- Title and ScriptTitle stripped of bold / italic wikimarkup ['PublicationPlace'] = PublicationPlace, ['Date'] = first_set(COinS_date, Date), -- COinS_date has correctly formatted date if Date is valid; any reason to keep Date here? Should we be including invalid dates in metadata? ['Series'] = Series, ['Volume'] = Volume, ['Issue'] = Issue, ['Pages'] = get_coins_pages (first_set(Page, Pages, At)), -- pages stripped of external links ['Edition'] = Edition, ['PublisherName'] = PublisherName, ['URL'] = first_set( URL, ChapterURL ), ['Authors'] = a, ['ID_list'] = ID_list, ['RawPage'] = this_page.prefixedText, }; --[[Why is this here? Why are we mapping Title to Chapter when Periodical is set? if is_set(Periodical) and not is_set(Chapter) and is_set(Title) then Chapter = Title; ChapterLink = TitleLink; TransChapter = TransTitle; Title = ''; TitleLink = ''; TransTitle = ''; end ]] -- special case for cite newsgroup. Do this after COinS because we are modifying Publishername to include some static text if 'newsgroup' == config.CitationClass then if is_set (PublisherName) then PublisherName = '[[Newsgroup]]: ' .. externallink( 'news:' .. PublisherName, PublisherName ); end end -- Now perform various field substitutions. -- We also add leading spaces and surrounding markup and punctuation to the -- various parts of the citation, but only when they are non-nil. if not is_set(Authors) then local Maximum = tonumber( A['DisplayAuthors'] ); if is_set (Maximum) then if Maximum >= #a then -- if display-authors value greater than or equal to number of authors table.insert( z.maintenance_cats, "CS1 maint: display-authors"); -- add maintenance category because display-authors parameter may be removed end else Maximum = #a + 1; -- number of authors + 1 end local control = { format = NameListFormat, -- empty string or 'vanc' maximum = Maximum, lastauthoramp = LastAuthorAmp, page_name = this_page.text -- get current page name so that we don't wikilink to it via authorlinkn }; -- If the coauthor field is also used, prevent ampersand and et al. formatting. if is_set(Coauthors) then control.lastauthoramp = nil; control.maximum = #a + 1; end Authors = listpeople(control, a) end if not is_set(Authors) and is_set(Coauthors) then -- coauthors aren't displayed if one of authors=, authorn=, or lastn= isn't specified table.insert( z.message_tail, { seterror('coauthors_missing_author', {}, true) } ); -- emit error message end local EditorCount if not is_set(Editors) then local Maximum = tonumber( A['DisplayEditors'] ); -- Preserve old-style implicit et al. if not is_set(Maximum) and #e == 4 then Maximum = 3; table.insert( z.message_tail, { seterror('implict_etal_editor', {}, true) } ); elseif not is_set(Maximum) then Maximum = #e + 1; end local control = { format = NameListFormat, -- empty string or 'vanc' maximum = Maximum, lastauthoramp = LastAuthorAmp, page_name = this_page.text -- get current page name so that we don't wikilink to it via editorlinkn }; Editors, EditorCount = listpeople(control, e); else EditorCount = 1; end local Cartography = ""; local Scale = ""; if config.CitationClass == "map" then if not is_set( Authors ) and is_set( PublisherName ) then Authors = PublisherName; PublisherName = ""; end Cartography = A['Cartography']; if is_set( Cartography ) then Cartography = sepc .. " " .. wrap_msg ('cartography', Cartography, use_lowercase); end Scale = A['Scale']; if is_set( Scale ) then Scale = sepc .. " " .. Scale; end end Format = is_set(Format) and " (" .. Format .. ")" or ""; if not is_set(URL) and not is_set(ArchiveURL) and not is_set(ConferenceURL) and -- TODO: keep this here? conference as part of cite web or cite podcast? not is_set(TranscriptURL) then -- Test if cite web or cite podcast |url= is missing or empty if inArray(config.CitationClass, {"web","podcast", "mailinglist"}) then table.insert( z.message_tail, { seterror( 'cite_web_url', {}, true ) } ); end -- Test if accessdate is given without giving a URL if is_set(AccessDate) and not is_set(ChapterURL)then -- ChapterURL may be set when the others are not set; TODO: move this to a separate test? table.insert( z.message_tail, { seterror( 'accessdate_missing_url', {}, true ) } ); AccessDate = ''; end -- Test if format is given without giving a URL if is_set(Format) then Format = Format .. seterror( 'format_missing_url', {'format', 'url'} ); end end --[[ -- Test if citation has no title if not is_set(Title) and -- not is_set(Periodical) and -- not a title -- not is_set(Conference) and -- not a title not is_set(TransTitle) and not is_set(ScriptTitle) then table.insert( z.message_tail, { seterror( 'citation_missing_title', {}, true ) } ); end if 'none' == Title and is_set(Periodical) then -- special case Title = ''; -- set title to empty string table.insert( z.maintenance_cats, "CS1 maint: Untitled periodical"); -- add to maint category end ]] local OriginalURL; DeadURL = DeadURL:lower(); -- used later when assembling archived text if is_set( ArchiveURL ) then if is_set (URL) then OriginalURL = URL; -- save copy of original source URL if 'no' ~= DeadURL then -- if URL set then archive-url applies to it URL = ArchiveURL -- swap-in the archive's url URLorigin = A:ORIGIN('ArchiveURL') -- name of archive url parameter for error messages end elseif is_set (ChapterURL) then -- URL not set so if chapter-url is set apply archive url to it OriginalURL = ChapterURL; -- save copy of source chapter's url for archive text if 'no' ~= DeadURL then ChapterURL = ArchiveURL -- swap-in the archive's url URLorigin = A:ORIGIN('ArchiveURL') -- name of archive url parameter for error messages end end end if inArray(config.CitationClass, {"web","news","journal","pressrelease","podcast", "newsgroup"}) or ('citation' == config.CitationClass and is_set (Periodical) and not is_set (Encyclopedia)) then if is_set (Chapter) or is_set (TransChapter) or is_set (ChapterURL)then -- chapter parameters not supported for these citation types table.insert( z.message_tail, { seterror( 'chapter_ignored', {}, true ) } ); -- add error message Chapter = ''; -- set to empty string to be safe with concatenation TransChapter = ''; ChapterURL = ''; end else -- otherwise, format chapter / article title Chapter = format_chapter_title (Chapter, TransChapter, ChapterURL, ChapterURLorigin); if is_set (Chapter) then ChapterFormat = is_set(ChapterFormat) and " (" .. ChapterFormat .. ")" or ""; if is_set(ChapterFormat) and not is_set (ChapterURL) then -- Test if |chapter-format= is given without giving a |chapter-url= ChapterFormat = ChapterFormat .. seterror( 'format_missing_url', {'chapter-format', 'chapter-url'} ); end Chapter = Chapter .. ChapterFormat .. sepc .. ' '; end end -- Format main title. if is_set(TitleLink) and is_set(Title) then Title = "[[" .. TitleLink .. "|" .. Title .. "]]" end if inArray(config.CitationClass, {"web","news","journal","pressrelease","podcast", "newsgroup", "mailinglist"}) or ('citation' == config.CitationClass and is_set (Periodical) and not is_set (Encyclopedia)) then Title = kern_quotes (Title); -- if necessary, separate title's leading and trailing quote marks from Module provided quote marks Title = wrap_style ('quoted-title', Title); Title = script_concatenate (Title, ScriptTitle); -- <bdi> tags, lang atribute, categorization, etc; must be done after title is wrapped TransTitle= wrap_style ('trans-quoted-title', TransTitle ); elseif 'report' == config.CitationClass then -- no styling for cite report Title = script_concatenate (Title, ScriptTitle); -- <bdi> tags, lang atribute, categorization, etc; must be done after title is wrapped TransTitle= wrap_style ('trans-quoted-title', TransTitle ); -- for cite report, use this form for trans-title else Title = wrap_style ('italic-title', Title); Title = script_concatenate (Title, ScriptTitle); -- <bdi> tags, lang atribute, categorization, etc; must be done after title is wrapped TransTitle = wrap_style ('trans-italic-title', TransTitle); end TransError = ""; if is_set(TransTitle) then if is_set(Title) then TransTitle = " " .. TransTitle; else TransError = " " .. seterror( 'trans_missing_title' ); end end Title = Title .. TransTitle; if is_set(Title) then if not is_set(TitleLink) and is_set(URL) then Title = externallink( URL, Title ) .. TransError .. Format URL = ""; Format = ""; else Title = Title .. TransError; end end if is_set(Place) then Place = " " .. wrap_msg ('written', Place, use_lowercase) .. sepc .. " "; end if is_set(Conference) then if is_set(ConferenceURL) then Conference = externallink( ConferenceURL, Conference ); end Conference = sepc .. " " .. Conference elseif is_set(ConferenceURL) then Conference = sepc .. " " .. externallink( ConferenceURL, nil, ConferenceURLorigin ); end if not is_set(Position) then local Minutes = A['Minutes']; if is_set(Minutes) then Position = " " .. Minutes .. " " .. cfg.messages['minutes']; else local Time = A['Time']; if is_set(Time) then local TimeCaption = A['TimeCaption'] if not is_set(TimeCaption) then TimeCaption = cfg.messages['event']; if sepc ~= '.' then TimeCaption = TimeCaption:lower(); end end Position = " " .. TimeCaption .. " " .. Time; end end else Position = " " .. Position; At = ''; end if not is_set(Page) then if is_set(Pages) then if is_set(Periodical) and not inArray(config.CitationClass, {"encyclopaedia","web","book","news","podcast"}) then Pages = ": " .. Pages; elseif tonumber(Pages) ~= nil then Pages = sepc .." " .. PPrefix .. Pages; else Pages = sepc .." " .. PPPrefix .. Pages; end end else if is_set(Periodical) and not inArray(config.CitationClass, {"encyclopaedia","web","book","news","podcast"}) then Page = ": " .. Page; else Page = sepc .." " .. PPrefix .. Page; end end At = is_set(At) and (sepc .. " " .. At) or ""; Position = is_set(Position) and (sepc .. " " .. Position) or ""; if config.CitationClass == 'map' then local Section = A['Section']; local Inset = A['Inset']; if first_set( Pages, Page, At ) ~= nil or sepc ~= '.' then if is_set( Section ) then Section = ", " .. wrap_msg ('section', Section, true); end if is_set( Inset ) then Inset = ", " .. wrap_msg ('inset', Inset, true); end else if is_set( Section ) then Section = sepc .. " " .. wrap_msg ('section', Section, use_lowercase); if is_set( Inset ) then Inset = ", " .. wrap_msg ('inset', Inset, true); end elseif is_set( Inset ) then Inset = sepc .. " " .. wrap_msg ('inset', Inset, use_lowercase); end end At = At .. Section .. Inset; end if is_set (Language) then Language = language_parameter (Language, this_page.namespace); -- format, categories (article namespace only), name from ISO639-1, etc else Language=""; -- language not specified so make sure this is an empty string; end Others = is_set(Others) and (sepc .. " " .. Others) or ""; -- handle type parameter for those CS1 citations that have default values if inArray(config.CitationClass, {"AV-media-notes", "DVD-notes", "mailinglist", "podcast", "pressrelease", "report", "techreport", "thesis"}) then TitleType = set_titletype (config.CitationClass, TitleType); if is_set(Degree) and "دانشنامه" == TitleType then -- special case for cite thesis TitleType = Degree .. " thesis"; end end if is_set(TitleType) then -- if type parameter is specified TitleType = " (" .. TitleType .. ")"; -- display it in parentheses end TitleNote = is_set(TitleNote) and (sepc .. " " .. TitleNote) or ""; Edition = is_set(Edition) and (" " .. wrap_msg ('edition', Edition)) or ""; Issue = is_set(Issue) and (" (" .. Issue .. ")") or ""; Series = is_set(Series) and (sepc .. " " .. Series) or ""; OrigYear = is_set(OrigYear) and (" [" .. OrigYear .. "]") or ""; Agency = is_set(Agency) and (sepc .. " " .. Agency) or ""; if is_set(Volume) then if ( mw.ustring.len(Volume) > 4 ) then Volume = sepc .." " .. Volume; else Volume = " <b>" .. hyphentodash(Volume) .. "</b>"; end end ------------------------------------ totally unrelated data if is_set(Via) then Via = " " .. wrap_msg ('via', Via); end --[[ Subscription implies paywall; Registration does not. If both are used in a citation, the subscription required link note is displayed. There are no error messages for this condition. ]] if inArray(SubscriptionRequired:lower(), {'yes', 'true', 'y'}) then SubscriptionRequired = sepc .. " " .. cfg.messages['subscription']; -- subscription required message elseif inArray(RegistrationRequired:lower(), {'yes', 'true', 'y'}) then SubscriptionRequired = sepc .. " " .. cfg.messages['registration']; -- registration required message else SubscriptionRequired = ''; -- either or both might be set to something other than yes true y end if is_set(AccessDate) then local retrv_text = " " .. cfg.messages['retrieved'] AccessDate = nowrap_date (AccessDate); -- wrap in nowrap span if date in appropriate format if (sepc ~= ".") then retrv_text = retrv_text:lower() end -- if 'citation', lower case AccessDate = substitute (retrv_text, AccessDate); -- add retrieved text -- neither of these work; don't know why; it seems that substitute() isn't being called AccessDate = substitute (cfg.presentation['accessdate'], {sepc, AccessDate}); -- allow editors to hide accessdates end if is_set(ID) then ID = sepc .." ".. ID; end if "thesis" == config.CitationClass and is_set(Docket) then ID = sepc .." Docket ".. Docket .. ID; end if "report" == config.CitationClass and is_set(Docket) then -- for cite report when |docket= is set ID = sepc .. ' ' .. Docket; -- overwrite ID even if |id= is set end ID_list = buildidlist( ID_list, {DoiBroken = DoiBroken, ASINTLD = ASINTLD, IgnoreISBN = IgnoreISBN, Embargo=Embargo} ); if is_set(URL) then URL = " " .. externallink( URL, nil, URLorigin ); end if is_set(Quote) then if Quote:sub(1,1) == '"' and Quote:sub(-1,-1) == '"' then Quote = Quote:sub(2,-2); end Quote = sepc .." " .. wrap_style ('quoted-text', Quote ); -- wrap in <q>...</q> tags PostScript = ""; -- CS1 does not supply terminal punctuation when |quote= is set end local Archived if is_set(ArchiveURL) then if not is_set(ArchiveDate) then ArchiveDate = seterror('archive_missing_date'); end if "no" == DeadURL then local arch_text = cfg.messages['archived']; if sepc ~= "." then arch_text = arch_text:lower() end Archived = sepc .. " " .. substitute( cfg.messages['archived-not-dead'], { externallink( ArchiveURL, arch_text ), ArchiveDate } ); if not is_set(OriginalURL) then Archived = Archived .. " " .. seterror('archive_missing_url'); end elseif is_set(OriginalURL) then local arch_text = cfg.messages['archived-dead']; if sepc ~= "." then arch_text = arch_text:lower() end Archived = sepc .. " " .. substitute( arch_text, { externallink( OriginalURL, cfg.messages['original'] ), ArchiveDate } ); else local arch_text = cfg.messages['archived-missing']; if sepc ~= "." then arch_text = arch_text:lower() end Archived = sepc .. " " .. substitute( arch_text, { seterror('archive_missing_url'), ArchiveDate } ); end else Archived = "" end local Lay if is_set(LayURL) then if is_set(LayDate) then LayDate = " (" .. LayDate .. ")" end if is_set(LaySource) then LaySource = " – ''" .. safeforitalics(LaySource) .. "''"; else LaySource = ""; end if sepc == '.' then Lay = sepc .. " " .. externallink( LayURL, cfg.messages['lay summary'] ) .. LaySource .. LayDate else Lay = sepc .. " " .. externallink( LayURL, cfg.messages['lay summary']:lower() ) .. LaySource .. LayDate end else Lay = ""; end if is_set(Transcript) then if is_set(TranscriptURL) then Transcript = externallink( TranscriptURL, Transcript ); end elseif is_set(TranscriptURL) then Transcript = externallink( TranscriptURL, nil, TranscriptURLorigin ); end local Publisher; if is_set(Periodical) and not inArray(config.CitationClass, {"encyclopaedia","web","pressrelease","podcast"}) then if is_set(PublisherName) then if is_set(PublicationPlace) then Publisher = PublicationPlace .. ": " .. PublisherName; else Publisher = PublisherName; end elseif is_set(PublicationPlace) then Publisher= PublicationPlace; else Publisher = ""; end if is_set(PublicationDate) then if is_set(Publisher) then Publisher = Publisher .. ", " .. wrap_msg ('published', PublicationDate); else Publisher = PublicationDate; end end if is_set(Publisher) then Publisher = " (" .. Publisher .. ")"; end else if is_set(PublicationDate) then PublicationDate = " (" .. wrap_msg ('published', PublicationDate) .. ")"; end if is_set(PublisherName) then if is_set(PublicationPlace) then Publisher = sepc .. " " .. PublicationPlace .. ": " .. PublisherName .. PublicationDate; else Publisher = sepc .. " " .. PublisherName .. PublicationDate; end elseif is_set(PublicationPlace) then Publisher= sepc .. " " .. PublicationPlace .. PublicationDate; else Publisher = PublicationDate; end end -- Several of the above rely upon detecting this as nil, so do it last. if is_set(Periodical) then if is_set(Title) or is_set(TitleNote) then Periodical = sepc .. " " .. wrap_style ('italic-title', Periodical) else Periodical = wrap_style ('italic-title', Periodical) end end --[[ Handle the oddity that is cite speech. This code overrides whatever may be the value assigned to TitleNote (through |department=) and forces it to be " (Speech)" so that the annotation directly follows the |title= parameter value in the citation rather than the |event= parameter value (if provided). ]] if "speech" == config.CitationClass then -- cite speech only TitleNote = " (Speech)"; -- annotate the citation if is_set (Periodical) then -- if Periodical, perhaps because of an included |website= or |journal= parameter if is_set (Conference) then -- and if |event= is set Conference = Conference .. sepc .. " "; -- then add appropriate punctuation to the end of the Conference variable before rendering end end end -- Piece all bits together at last. Here, all should be non-nil. -- We build things this way because it is more efficient in LUA -- not to keep reassigning to the same string variable over and over. local tcommon if inArray(config.CitationClass, {"journal","citation"}) and is_set(Periodical) then if is_set(Others) then Others = Others .. sepc .. " " end tcommon = safejoin( {Others, Title, TitleNote, Conference, Periodical, Format, TitleType, Scale, Series, Language, Cartography, Edition, Publisher, Agency, Volume, Issue}, sepc ); else tcommon = safejoin( {Title, TitleNote, Conference, Periodical, Format, TitleType, Scale, Series, Language, Volume, Issue, Others, Cartography, Edition, Publisher, Agency}, sepc ); end if #ID_list > 0 then ID_list = safejoin( { sepc .. " ", table.concat( ID_list, sepc .. " " ), ID }, sepc ); else ID_list = ID; end local idcommon = safejoin( { ID_list, URL, Archived, AccessDate, Via, SubscriptionRequired, Lay, Quote }, sepc ); local text; local pgtext = Position .. Page .. Pages .. At; if is_set(Authors) then if is_set(Coauthors) then local sep = '; '; if 'vanc' == NameListFormat then sep = ', '; end Authors = Authors .. sep .. Coauthors; end if is_set(Date) then Date = " ("..Date..")" .. OrigYear .. sepc .. " " elseif string.sub(Authors,-1,-1) == sepc then Authors = Authors .. " " else Authors = Authors .. sepc .. " " end if is_set(Editors) then local in_text = " "; local post_text = ""; if is_set(Chapter) then in_text = in_text .. cfg.messages['in'] .. " " else if EditorCount <= 1 then post_text = ", " .. cfg.messages['editor']; else post_text = ", " .. cfg.messages['editors']; end end if (sepc ~= '.') then in_text = in_text:lower() end Editors = in_text .. Editors .. post_text; if (string.sub(Editors,-1,-1) == sepc) then Editors = Editors .. " " else Editors = Editors .. sepc .. " " end end text = safejoin( {Authors, Date, Chapter, Place, Editors, tcommon }, sepc ); text = safejoin( {text, pgtext, idcommon}, sepc ); elseif is_set(Editors) then if is_set(Date) then if EditorCount <= 1 then Editors = Editors .. ", " .. cfg.messages['editor']; else Editors = Editors .. ", " .. cfg.messages['editors']; end Date = " (" .. Date ..")" .. OrigYear .. sepc .. " " else if EditorCount <= 1 then Editors = Editors .. " (" .. cfg.messages['editor'] .. ")" .. sepc .. " " else Editors = Editors .. " (" .. cfg.messages['editors'] .. ")" .. sepc .. " " end end text = safejoin( {Editors, Date, Chapter, Place, tcommon}, sepc ); text = safejoin( {text, pgtext, idcommon}, sepc ); else if is_set(Date) then if ( string.sub(tcommon,-1,-1) ~= sepc ) then Date = sepc .." " .. Date .. OrigYear else Date = " " .. Date .. OrigYear end end if config.CitationClass=="journal" and is_set(Periodical) then text = safejoin( {Chapter, Place, tcommon}, sepc ); text = safejoin( {text, pgtext, Date, idcommon}, sepc ); else text = safejoin( {Chapter, Place, tcommon, Date}, sepc ); text = safejoin( {text, pgtext, idcommon}, sepc ); end end if is_set(PostScript) and PostScript ~= sepc then text = safejoin( {text, sepc}, sepc ); --Deals with italics, spaces, etc. text = text:sub(1,-sepc:len()-1); -- text = text:sub(1,-2); --Remove final separator (assumes that sepc is only one character) end text = safejoin( {text, PostScript}, sepc ); -- Now enclose the whole thing in a <span/> element local options = {}; if is_set(config.CitationClass) and config.CitationClass ~= "citation" then options.class = "citation " .. config.CitationClass; else options.class = "citation"; end if is_set(Ref) and Ref:lower() ~= "none" then local id = Ref if ( "harv" == Ref ) then local names = {} --table of last names & year if #a > 0 then for i,v in ipairs(a) do names[i] = v.last if i == 4 then break end end elseif #e > 0 then for i,v in ipairs(e) do names[i] = v.last if i == 4 then break end end end names[ #names + 1 ] = first_set(Year, anchor_year); -- Year first for legacy citations and for YMD dates that require disambiguation id = anchorid(names) end options.id = id; end if string.len(text:gsub("<span[^>/]*>.-</span>", ""):gsub("%b<>","")) <= 2 then z.error_categories = {}; text = seterror('empty_citation'); z.message_tail = {}; end if is_set(options.id) then text = '<span id="' .. mw.uri.anchorEncode(options.id) ..'" class="' .. mw.text.nowiki(options.class) .. '">' .. text .. "</span>"; else text = '<span class="' .. mw.text.nowiki(options.class) .. '">' .. text .. "</span>"; end local empty_span = '<span style="display:none;"> </span>'; -- Note: Using display: none on then COinS span breaks some clients. local OCinS = '<span title="' .. OCinSoutput .. '" class="Z3988">' .. empty_span .. '</span>'; text = text .. OCinS; if #z.message_tail ~= 0 then text = text .. " "; for i,v in ipairs( z.message_tail ) do if is_set(v[1]) then if i == #z.message_tail then text = text .. errorcomment( v[1], v[2] ); else text = text .. errorcomment( v[1] .. "; ", v[2] ); end end end end no_tracking_cats = no_tracking_cats:lower(); if inArray(no_tracking_cats, {"", "no", "false", "n"}) then for _, v in ipairs( z.error_categories ) do text = text .. '[[رده:' .. v ..']]'; end for _, v in ipairs( z.maintenance_cats ) do -- append maintenance categories text = text .. '[[رده:' .. v ..']]'; end for _, v in ipairs( z.properties_cats ) do -- append maintenance categories text = text .. '[[رده:' .. v ..']]'; end end return text end -- This is used by templates such as {{cite book}} to create the actual citation text. function z.citation(frame) local pframe = frame:getParent() if nil ~= string.find( frame:getTitle(), 'تمرین', 1, true ) then -- did the {{#invoke:}} use sandbox version? cfg = mw.loadData( 'Module:Citation/CS1/Configuration/تمرین' ); -- load sandbox versions of Configuration and Whitelist and ... whitelist = mw.loadData( 'Module:Citation/CS1/Whitelist/تمرین' ); dates = require('Module:Citation/CS1/Date_validation/تمرین').dates -- ... sandbox version of date validation code else -- otherwise cfg = mw.loadData( 'Module:Citation/CS1/Configuration' ); -- load live versions of Configuration and Whitelist and ... whitelist = mw.loadData( 'Module:Citation/CS1/Whitelist' ); dates = require('Module:Citation/CS1/Date_validation').dates -- ... live version of date validation code end local args = {}; local suggestions = {}; local error_text, error_state; local config = {}; for k, v in pairs( frame.args ) do config[k] = v; args[k] = v; end for k, v in pairs( pframe.args ) do if v ~= '' then if not validate( k ) then error_text = ""; if type( k ) ~= 'string' then -- Exclude empty numbered parameters if v:match("%S+") ~= nil then error_text, error_state = seterror( 'text_ignored', {v}, true ); end elseif validate( k:lower() ) then error_text, error_state = seterror( 'parameter_ignored_suggest', {k, k:lower()}, true ); else if #suggestions == 0 then suggestions = mw.loadData( 'Module:Citation/CS1/Suggestions' ); end if suggestions[ k:lower() ] ~= nil then error_text, error_state = seterror( 'parameter_ignored_suggest', {k, suggestions[ k:lower() ]}, true ); else error_text, error_state = seterror( 'parameter_ignored', {k}, true ); end end if error_text ~= '' then table.insert( z.message_tail, {error_text, error_state} ); end end args[k] = v; elseif args[k] ~= nil or (k == 'postscript') then args[k] = v; end end return citation0( config, args) end return z